top of page

Load data for .218 Bee + .224 | 55gr | Speer TBBC

Recommended Powder(s):

.218 Bee + .224 | 55gr | Speer TBBC

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 55gr | Speer TBBC
Manufacturer SKU:
1725
Bullet Weight:
55gr | 3.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.727" | 18.5mm
Caliber:
.218 Bee load data
Case Length (l3):
1.345" | 34.2mm
Cartridge Length (C.O.L.):
1.655" | 42.0mm
Seated Depth:
0.417" | 10.6mm
Shank Seated Depth:
0.417" | 10.6mm
Case Capacity:
18.0 Grains of Water | 1.17 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B6065_C53
Last updated:
2025-01-01

Load data for 30 loads in caliber .218 Bee with .224 | 55gr | Speer TBBC bullet and 15 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
89%
40509
87%
**05
98%
[ADI AR 2207]*
<<locked>>
97%
29892
64%
**62
92%
[Accurate 5744]*
<<locked>>
87%
40901
88%
**87
93%
Accurate No. 11 FS
<<locked>>
88%
41002
88%
**93
97%
Hodgdon LilGun
<<locked>>
85%
41698
90%
**98
100%
[IMR 4227]*
<<locked>>
96%
39494
85%
**61
94%
[Lovex D060]*
<<locked>>
89%
40901
88%
**87
93%
[Lovex D063]*
<<locked>>
87%
41568
90%
**90
93%
Lovex S053
<<locked>>
96%
36114
78%
**28
97%
[ReloadSwiss RS 36]*
<<locked>>
97%
37695
81%
**74
94%
SNPE Vectan BA6 1/2
<<locked>>
96%
33939
73%
**06
100%
[Shooters World Blackout]*
<<locked>>
87%
41568
90%
**90
93%
[Shooters World Buffalo Rifle]*
<<locked>>
89%
40901
88%
**87
93%
Vihtavuori N110 👍
<<locked>>
94%
41031
88%
**97
100%
[Vihtavuori N120]*
<<locked>>
97%
28021
60%
**77
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
32227
69%
**44
96%
[ADI AR 2207]*
<<locked>>
93%
26643
57%
**70
90%
[Accurate 5744]*
<<locked>>
82%
35230
76%
**65
90%
[Accurate No. 11 FS]*
<<locked>>
81%
32706
70%
**26
94%
Hodgdon LilGun
<<locked>>
81%
36637
79%
**13
100%
[IMR 4227]*
<<locked>>
87%
30197
65%
**57
90%
[Lovex D060]*
<<locked>>
84%
35230
76%
**65
90%
[Lovex D063]*
<<locked>>
81%
34418
74%
**46
90%
[Lovex S053]*
<<locked>>
81%
23699
51%
**19
92%
[ReloadSwiss RS 36]*
<<locked>>
89%
30255
65%
**10
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
22902
49%
**51
99%
[Shooters World Blackout]*
<<locked>>
81%
34418
74%
**46
90%
[Shooters World Buffalo Rifle]*
<<locked>>
84%
35230
76%
**65
90%
Vihtavuori N110
<<locked>>
81%
28427
61%
**47
99%
[Vihtavuori N120]*
<<locked>>
91%
24091
52%
**62
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page